I. PRODUCTION TECHNOLOGY LAB

• Arc welding machine

Primary voltage: 400/230V

Secondary voltage: 50/80V

• Spot welding machine  

440/230 V

• Injection molding machine
• Wood Turning lathe machine
• Hydraulic press

II. MACHINE TOOLS LAB

• Grinding machine

Power: 0.25 HP: 2900rpm

• Drilling machine

16 Amps, 3 ph, 440V

• Lathe machine

(16 Amps, 3 ph, 440V, 50Hz)                             5 nos

III. THERMAL ENGINEERING LAB

• Two stroke petrol engine Test Rig

Make: Bajaj BP: 2.2 kW, 1500rpm

Dynamometer: Electrical

• Port timing diagram
• Valve timing diagram
• Reciprocating air compressor Test Rig

 3HP

• Twin cylinder diesel engine Test Rig

Make: Kirloskar BP: 10kW, 3000 rpm

Dynamometer: Eddy current

• Single cylinder four stroke diesel engine Test Rig
• Make: Kirloskar BP: 3.7kW kirl

 Rope type dynamometer,

IV. TOM LAB

• Balancing of rotating masses
• Gyroscope ( Y6HP,125w,220V,0.6Amps )
• Universal governor (2Amps,current,180V,1500rpm)
• Cam apparatus (180V,1500rpm,2Amps)
• Moment of inertia of fly wheel
• Whirling of shaft apparatus (length of shaft=104cm,6000rpm,1/6HP)
  V. FLUID MECHANICS AND HYDRAULIC MACHINERY LAB

• Turbine flow meter (20mm multi jet ,2.5 KJ/HR,ΔP=0.1mpa)
• Impact of jet on vanes
• Friction factor
• Centrifugal pump
• Calibration of venturi meter and orifice meter
• Bernoulli’s apparatus (with test points)
• Discharge over notches (trapezoidal,rectangle,triangle,notches)
• Metacentric height apparatus
• Kaplan turbine (5HP,capacity L/S,32-13,400V,50Hz,2870rpm)
• Francis turbine (5HP,capacity L/S,32-13,400V,50Hz,2870rpm,head range,5-15M)
• Pelton wheel

1. STRENGTH OF MATERIALS LAB

• Universal testing machine ( 100 Tons )
• Impact testing machine (3000 joules )
• Brinell hardness test (3000kgf)
• Rockwell hardness test (150kgf)
• Cantilever beam (1000×60×6mm)
• Simply supported beam (1000×60×6mm)

VII. HEAT TRANSFER LAB

• Emissivity apparatus
• Parallel and counter flow heat exchanger
• Critical heat flux apparatus
• Forced convection apparatus
• Thermal conductivity of metal rod
• Stefan Boltzmann’s apparatus
• Heat pipe demonstrator apparatus
• Shell and tube heat exchanger
• COP of VCR System with Capillary and Thermal Expansion Valve.
• PIN-FIN Apparatus.
• Heat Pipe Demonstrator Apparatus (ss-pipe,copper pipe)
• Natural Convection Apparatus.
• Composite Slab Apparatus.

VIII.METALLURGY LAB

• Double disc polishing machine
• Hydraulic semi automatic SMP
• Muffle furnace (1000⁰ C)
• Jominy end quench apparatus
• Dry and wet limisher belt surface (25/ 0.2 HP/KW)
• Cut off machine
• Monocular microscope
• Binocular microscope

1. METROLOGY LAB

• Granite surface plate
• Magnetic stand
• Sine bar

 

 

1. INSTRUMENTATION LAB

• Dead weight pressure gauge
• Linear variable differential transformer
• Strain gauge.
• Thermocouple
• Capacitive transducer
• Speed measurements

1. MACHINE DYNAMICS LAB

 

 

XII. MECHATRONICS LAB.

• Complete transducer kit.
• Traffic light controller
• Lift control module.
• Water level controller.
• Belt conveyor model.
• Programmable logic control trainer kit.

 

 

 

 

 

 

 

 

MECHANICAL COMPUTER LAB

 

• CAD/CAM LAB (Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)
• COMPUTATIONAL FLUID DYNAMICS LAB (Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)
• CAEDP LAB(Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)
• DESIGN PRACTICE LAB -1 (Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)
• DESIGN PRACTICE LAB –II (Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)
• COMPUTATIONAL MATHEMATICS LAB (Pentanim R3.6GHZ,RAM-2GB,320GB HARD DISK)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIKAS COLLEGE OF ENGINEERING &TECHNOLOGY

NUNNA, VIJAYAWADA RURAL

  DEPARTMENT OF MECHANICAL ENGINEERING

CLASS ROOMS

 

I B.TECH (ME) CLASS ROOM

II B.TECH (ME) CLASS ROOM

III B.TECH (ME) CLASS ROOM

IV B.TECH (ME) CLASS ROOM

I M.TECH (MD) CLASS ROOM

II M.TECH (MD) CLASS ROOM

SEMINAR HALL (MECH.DEPT.)

DEPARTMENT LIBRARY (MECH.DEPT)